custom logo sizing

Powdie · Full Member Joined: 30 Oct 2007 $ 0.89

question, is there a possible way of making the 90000 bytes more? I have a banner i made(link below). The width and Height is fine it's just the size is more than 90000 bytes. It would be great if it were possible to make the bytes more, then u can really go far with makin ur custom logos. Or make it an option either uploadin or an html code keeping the height and wideth of course.

http://i257.photobucket.com/albums/hh218/battlenetclan/bncbanner.gif

Powder Puff
_________________

karii · Full Member Joined: 12 Jul 2007 $ 0.89

the easiest way to get around that... on your custom logo, leave it blank with Centered (Hide Style's Logo, if Any) selected... then on your Configuration • page.. place the <img src="http://i257.photobucket.com/albums/hh218/battlenetclan/bncbanner.gif "> which should do the trick...

it can be risky but should work.. Smile

_________________

Founder and Leader of Covenant

Powdie · Full Member Joined: 30 Oct 2007 $ 0.89

were do i place it on the configuration page, i dont see
a spot to put that.
_________________

karii · Full Member Joined: 12 Jul 2007 $ 0.89

opps, sorry ... in the site description box
_________________

Founder and Leader of Covenant

ChickenMan · Posted: Thu Jan 31, 2008 3:54 pm Post subject:

That will work. Karii is right though....doing that is dangerous as that area is not an HTML specific area. Doing/attempting this is at your own risk.
_________________
Make Your Portal Look Like THIS!!!!

Powdie · Full Member Joined: 30 Oct 2007 $ 0.89

that's what i thought were u put it, I did that, and it didnt work.
I greatly appreciate your help. I'll try and figure something out.
But it would be sweet if u could do the banner in html forum
instead of the upload. Laughing

_________________

forumwise · Admin Joined: 28 Jul 2005 $ 78.78

Well, that is a very big banner, with lots and lots of frames.

Here's one that should fit:

link
_________________
Mark

Thank you for choosing ForumWise.

Please don't private message me for support or chit-chat, use the forums.

Powdie · Full Member Joined: 30 Oct 2007 $ 0.89

Thanks so much for tryin to help Mark, Very Happy

I'll have to figure something out. the et logo u can see skips when it twirls.
_________________

forumwise · Admin Joined: 28 Jul 2005 $ 78.78

Yeah, I had to take out frames to make it small enough.

Sorry it didn't help.
_________________
Mark

Thank you for choosing ForumWise.

Please don't private message me for support or chit-chat, use the forums.

Powdie · Full Member Joined: 30 Oct 2007 $ 0.89

no worries i'll see if i can shorten it without noticing it skips.
_________________

forumwise · Admin Joined: 28 Jul 2005 $ 78.78

My suggestion is to make the rotating logo static because that takes tons of frames to animate all the way around. The glowing text logo would only take a few frames, and the image would be small enough probably if you kept it to about 5 frames or so. I can reduce the size of animations too, so if you are close to the limit, I might be able to optimize it down a bit.
_________________
Mark

Thank you for choosing ForumWise.

Please don't private message me for support or chit-chat, use the forums.

Powdie · Full Member Joined: 30 Oct 2007 $ 0.89

Karii just want to thank u so much for that little tip, I found out that the theme i had didnt support to put that img in the site description. so i went and found a new theme and i was able to
put my banner in. lol i'm so happy now Very Happy

thank u thank u again.
and thank u mark for ur help as well.

Wink

Powder Puff
_________________

karii · Full Member Joined: 12 Jul 2007 $ 0.89

np, glad u got it worked out...
_________________

Founder and Leader of Covenant

	ForumWise Support Forum Index -> Styles & Logos Support	All times are GMT
Page 1 of 1